MTS Technik Coilover Kit Stance VAG PQ35 Platform (MK5 Golf etc)

Product Description
 
Coilover Kit MTS Technik for Volkswagen/VAG PQ35 platform.
MK5 Golf, Audi A3,Touran etc. Check drop down options.
 
Lowering the front axle between 35 - 70 mm, and rear between 35 - 60 mm.
 
Dedicated for the years of: 02/03 - 05/10, for the engine version: 1.4 TSI / 1.6 / 1.6 FSI / 1.9 TDI / 2.0 FSI / 2.0 TDI / 2.0 TDI 16V.
 
2 year warranty with no mileage limit to confirm high quality.
 
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
 
The use of twin-tube technology guarantees stable shock absorber performance.
 
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
 
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
 
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
 
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
 
Coilover springs made by Eibach, the world leader in the sport springs industry.
 
Tech Spec
 
Series                                                                                                                                Stance
 
Housing                                                                                                                               Gold
 
Max. Axle Load                                                                                                      FA-1035 kg
 
Max. Axle Load                                                                                                      RA-1150 kg
 
Lowering FA                                                                                                           35 - 70 mm
 
Lowering RA                                                                                                          35 - 60 mm
 
Camber / top mount FA                                                                                                     no
 
Camber / top mount RA                                                                                                    no
 
Coilover Main Spring (Front)Spring rate                                  (34 - 40 - 70 N/mm)
 
Coilover Main Spring (Rear)Spring rate                                                     (80 N/mm)
 
Coilover Helper Spring (Rear)Spring rate                                                 (20 N/mm)
 
TUV Certificate                                                                                                                    Yes
 
Product Notes
 
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
 
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
 
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
 
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
 
35 - Rear thread adjustment block is mounted on the top.
 
39 - Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
 
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.